TECHNOLOGICAL OPPORTUNITIES FOR MANUFACTURE OF PRODUCE
The OAO “Grodno Engineering Plant” specialises mainly in manufacture of metal cisterns, tankers for transportation of dangerous cargoes, reservoirs and tanks for oil-refining and food industry, makingnonstandard equipment and metal constructions under one-of-a-kind anf small-serial orders.
Entire products are manufactured on new technological equipment.
Thermal cutting machine;
Gas Furnace ThermoGas-DO-30.30.11/900-I2;
Manned work enclosure of abrasive-jet ckeaning;
Pipe-bending burnishing machine;
Painting-and-drying chamber.
Technical characteristics of thermal cutting machine “Kometa M-P-1K1Pl P-3-8-12-1”
Description of indicator |
Norm |
Maximum dimensions of processed sheets (width x length), mm |
3,000 x 6,000 |
Range of cut sheet thicknesses, mm |
|
by plasma arc quality cutting |
up to 35 mm |
by gas cutting |
up to 200 mm |
Type of heating gas |
natural gas |
Office gas |
air, oxygen, nitrogen |
Technical characteristics of gas furnace Thermo-Gas-DO-30.30.11/900-I2
Characteristic |
Value |
Maximum load on sole, kg, max |
3,000 |
Effective lod on sole, kg |
3,000 |
Mode of thermal processing |
tempering, normalisation etc. |
Heating temperature,°C, max |
900 |
Dimensions of furnace laboratory (width x length x height) at least, m |
3.0 x 3.0 x 1.5 |
Height from sole level up to furnace roof, m |
1.8 m |
Fuel |
natural gas |
Gas pressure delivered to furnace, MPa, no more than |
0.3 |
Technical characteristics of painting-and-drying chamber
Parameter |
Meas. unit |
Value |
Internal dimensions of chamber |
m |
14.84 / 5.04 / 5.04 |
Gateway dimensions |
m |
3.8 / 4.42 |
Thermal capacity of heat exchanger |
kcal/h |
220,000 |
Air delivery |
m3/h |
64,000 |
Exhaust |
m3/h |
62,000 |
Temperature in painting mode |
0°C |
20 |
Temperature in drying mode |
0°C |
60 |
Technical characteristics of painting-and-drying chamber
Parameter |
Meas. unit |
Value |
Maximum diameter of processed pipe (wall thickness) |
mm |
89 x 4.5 |
Maximum bend radius |
mm |
500 |
Maximum bend angle |
degree |
190 |
Bend precision |
degree |
± 0.1 |
Maximum workpiece length |
mm |
4,000 |
Technical characteristics of manned work enclosure of abrasive-jet ckeaning
No. |
Description of indicator |
Norm |
1. |
Working width, mm |
4,000 |
2. |
Working length, mm |
12,000 |
3. |
Working height, mm |
4,000 |
4. |
Applied abrasive material |
Steel or iron shot, fractions up 2 mm |
7. |
Number of plants |
Two (DSG-200-SP with remote control) |
To download production catalogue