Tank trucks for condensed gases transportation

 

Tank trucks for condensed hydrocarbon gases transportation ACZ-10

 

V=10 m/cube
Meant for transportation, short-term storage, filling of stationary reservoirs and vehicles with condensed hydrocarbon gases according to GOST 20448 (commercial butane, mixture of commercial propane and commercial butane) with the pressure of up to 1,6 megapascal.
The tank is mounted on МАZ - 533602-240 (ABS) chassis basis.

SPECIFICATION:

Tank truck capacity, m3 : 9,3
Tank truck fill factor, no more than: 0,85
Working pressure, megapascal: 1,6
Design pressure, megapascal: 1,8
Test pressure, megapascal: 2,3
Wall working temperature:from –40 °Сto +45 °С
Wall specified temperature: +50 °С
Mass of the equipped tank truck, kg, no more than: 10500
Fully loaded mass, kg, no more than: 16000
Fully loaded mass distribution, kg, no more than:
  - on front axis: 6000
  - on back axis: 10000
Tank trucks overall dimensions, mm, no more than
   - length: 8250
  - width: 2 500
  - height: 3 160
Tank tracks cell overall dimensions, mm, no more than
  - length: 4100
  - external diameter: 1820 
Fuel supply equipment characteristics:
  - pump output, m3 /hour, no less than: 9,3-18,2
  - pressure-suction hoses number: 2
  - pressure-suction hoses inside diameter, Du, mm: 40
   - pressure-suction hoses total length, m: 13

 

 

Tanker-semitrailer PPTsT-20 on SAF axles
(pneumatic suspension, braking system EBS)

 

 

 

The PPTsT-20 is designed for transportation, short-time storage, filling of stationary reservoirs as well as for fuelling motor vehicles with liquified hydrocarbon gases according to GOST (state standard) 20448 (commercial butane, mixtures of commercial propane and butane), pressure up to 1.6 MPa.
The tanker-semitrailer is equipped with bottom valves, isolation valves, emergency valves, manometres, pumping equipment (with electric drive, cable 60 m, mass meter), delivery-and-suction hoses.

 

 

 

 

 

 

 

TECHNICAL CHARACTERISTICS

Tanker’s shell capacity, m3:	20
Tankers’ filling factor, at most:	0.85
Working pressure, MPa:	1.6
Design pressure, MPa:	1.8
Test pressure, MPa:	2.3
Working temperature of the wall:	from -40°C to +45°C
Design temperature of the wall:	from +50°C
Mass factors: Fully loaded mass, kg, at most: Distribution of fully loaded mass, kg, at most: on the fifth wheel: on rear truck	19,500 8,300 16,000
Overalll dimensions of tankers, mm, at most: - length: - width: - height:	9,800 2,500 3,350

 

 

 

 

 

 

Tanker-semitrailer PPTsT-36 on SAF axles
(pneumatic suspension (front, lift), braking system EBS)

 

 

 

The PPTsT-36 is designed for transportation, short-time storage, filling of stationary reservoirs as well as for fuelling motor vehicles with liquified hydrocarbon gases according to GOST (state standard) 20448 (commercial butane, mixtures of commercial propane and butane), pressure up to 1.6 MPa.
The tanker-semitrailer is equipped with bottom valves, isolation valves, emergency valves, manometres, pumping equipment (capacity 19.3 m3/h), cable 60 m, calculating instrument not designed for business accounting, delivery-and-suction hoses.

 

 

 

 

TECHNICAL CHARACTERISTICS

Tanker’s shell capacity, m3:	36
Tankers’ filling factor, at most:	0.85
Working pressure, MPa:	1.6
Design pressure, MPa:	1.8
Test pressure, MPa:	2.3
Working temperature of the wall:	from -40°C to +45°C
Design temperature of the wall:	from +50°C
Mass factors: Fully loaded mass, kg, at most: Distribution of fully loaded mass, kg, at most: on the fifth wheel: on rear truck	30,000 8,300 21,000
Overalll dimensions of tankers, mm, at most: - length: - width: - height:	12,300 2,500 3,500

 

 

 

 

To download production catalogue