Reservoirs for petroleum derivatives transportation
Tanker ATs-4.9 and Fueller ATZ-4.9
The tanker is mounted on the chassis of GAZ-3307 (3309) with ABS (antilock braking system)
Possible is fitting out with fuel distributing and pumping equipment
Material for manufacture: black steel 09G2S, stainless steel 12X18H10 3 mm thick
TECHNICAL CHARACTERISTICS:
The tanker is mounted on the chassis of GAZ-3307 (9)
Rated capacity, litres: 4,900
Each section is equipped with: a filler, a filling hatch, a vapour balancer, a bottom valve, a fine filter, a manometer, a counter, a fuel dispenser.
Tanker‘s material/thickness, mm: 09G2S/3
Fully loaded mass, kg, at most: 8,050
Laden mass, kg, at least: 3,800
Peripheral self-priming pump: STsL-00A
Overalll dimensions, mm:
- length: 6,400
- width: 2,400
- height: 2,600
Pipeline diameter (internal), mm: 65
Front axle weight of fully loaded mass, kg: 1,800
Rear axle weight of fully loaded mass, kg: 6,250
Filling and discharge time with the help of pump, min, at least/by gravity: 15/25
Additionally completed with:
2 sticks (canisters), 2 hoses, a set of rapid-action couplings, a first-aid kit, a felt mat, a flasher, a sandpit, fire extinguisher in conformity with requirements of “Promatomnadsor” of the Republic of Belarus
Types of tanker:
ATs-4.9 (1 section, pump STsL-00 2 sticks and delivery-and-suction hoses with rapid-action couplings etc.)
ATs-4.9/2 (2 sections, pump STsL-00 2 sticks and delivery-and-suction hoses with rapid-action couplings etc.)
ATZ-4.9 (1 section, pump STsL-00, one counter, a manometer, a fine filter, a filling hose and a fuel dispenser, 2 sticks and delivery-and-suction hoses with rapid-action couplings etc.)
ATZ-4.9/2 (2 sections, pump STsL-00, 2 counters, 2 manometers, a fine filter, 2 filling hoses and fuel dispensers, 2 sticks and delivery-and-suction hoses with rapid-action couplings etc.)
At customer’s option it is possible to manufacture on the same chassis tankers for transportation of food liquids, spirit, young wines and other liquids.
The chassis has been re-equipped according to the rules of the Gospromnadsor (state industrial oversight) for transportation of dangerous cargoes.
Tankers for Transportation of Oil Products ATs-5.5, ATZ-5.5
The tanker is mounted on the chassis of MAZ-4370.
Possible is fitting out with fuel distributing and pumping equipment
Material for manufacture: black steel 09G2S, stainless steel 12X18H10 4 mm thick
TECHNICAL CHARACTERISTICS:
The tanker is mounted on the chassis of MAZ-437040-80.
Rated capacity, l: 5,500
The section is equipped with: a filler, a filling hatch, a vapour balancer. There is a bottom valve in the lower part.
Tanker‘s material: 09G2S
Fully loaded mass, kg, at most: 10,100
Laden mass of tanker, kg,: 5,500
Peripheral self-priming pump: SVN-80A
Overalll dimensions, mm:
- length: 7,970
- width: 2,450
- height: 3,100
Pipeline diameter (internal), mm: 65
Front axle weight of fully loaded mass, kg: 3,650
Rear axle weight of fully loaded mass, kg: 6,450
Types of tanker:
ATs-5.5 (1 section, pump STsL-00 2 sticks and delivery-and-suction hoses with rapid-action couplings etc.)
ATs-5.5/2 (2 sections, pump STsL-00 2 sticks and delivery-and-suction hoses with rapid-action couplings etc.)
ATZ-5.5 (1 section, pump STsL-00, one counter, a manometer, a fine filter, a filling hose and a fuel dispenser, 2 sticks and delivery-and-suction hoses with rapid-action couplings etc.)
ATZ-5.5/2 (2 sections, pump STsL-00, 2 counters, 2 manometers, a fine filter, 2 filling hoses and fuel dispensers, 2 sticks and delivery-and-suction hoses with rapid-action couplings etc.)
To order of the customer we install a vapour extraction system.
At customer’s option it is possible to manufacture on the same chassis tankers for transportation of food liquids, spirit, young wines and other liquids.
The chassis has been re-equipped according to the rules of the Gospromnadsor (state industrial oversight) for transportation of dangerous cargoes.
Tankers for Transportation of Oil Products ATs-10, ATZ-10
The tanker is mounted on the chassis of MAZ-5337.
Possible is fitting out with fuel distributing and pumping equipment
Material for manufacture: black steel 09G2S, stainless steel 12X18H10 4 mm thick
TECHNICAL CHARACTERISTICS:
The tanker is mounted on the chassis of MAZ-5337 with ABS.
Rated capacity, l/sections: 10,000/2
Tanker‘s material/thickness: 09G2S/4
Fully loaded mass, kg, at most: 16,000
Laden mass of tanker, kg,: 9,500
Peripheral self-priming pump: SVN-80A
Overalll dimensions, mm:
- length: 7,790
- width: 2,500
- height: 3,100
Pipeline diameter (internal), mm: 65
Front axle weight of fully loaded mass, kg: 6,000
Rear axle weight of fully loaded mass, kg: 10,000
Types of tanker:
ATs-10 (1 section, pump SVN-80 2, sticks and delivery-and-suction hoses with with rapid-action couplings etc.)
ATs-10/2 (2 sections, pump SVN-80, 2 sticks and delivery-and-suction hoses with with rapid-action couplings etc.)
ATZ-10 (1 section, pump SVN-80, one counter, a manometer, a fine filter, a filling hose and a fuel dispenser, 2 sticks and delivery-and-suction hoses with with rapid-action couplings etc.)
ATZ-10/2 (2 sections, pump SVN-80, 2 counters, 2 manometers, a fine filter, 2 filling hoses and fuel dispensers, 2 sticks and delivery-and-suction hoses with with rapid-action couplings etc.)
To order of the customer we install a vapour extraction system.
The chassis has been re-equipped according to the rules of the Gospromnadsor (state industrial oversight) for transportation of dangerous cargoes.
Tankers for Transportation of Oil Products ATs-12
It is made of black steel 09G2S or stainless steel 12X18H10T, 4 mm thick for transportation of oil, light oil products, process liquors and drilling agents, spirit and wine materials etc.
The tanker may be mounted on the chassis of MAZ, MAZ-MAN.
Possible is manufacture of an “isothermal” (refrigerated) tanker.
TECHNICAL CHARACTERISTICS:
The tanker is mounted on the chassis of MAZ-6303.
Rated capacity, l/sections: 12,000
Number of sections: 1 piece.
The section is equipped with: a filler, a filling hatch, a vapour balancer. There is a bottom valve in the lower part.
Peripheral self-priming pump: SVN-80A
Tanker‘s material/thickness mm: 09G2S/4
Fully loaded mass, kg, at most: 24,500
Laden mass of tanker, kg,: 11,000
Overalll dimensions, mm:
- length: 9,600
- width: 2,500
- height: 3,160
Pipeline diameter (internal), mm: 80
Front axle weight of fully loaded mass, kg: 6,500
Rear axle weight of fully loaded mass, kg: 16,000
Options: one-section, two-section, three-section, it may also be completed with fuelling, pumping and other additional equipment.
The chassis has been re-equipped according to the rules of the Gospromnadsor (state industrial oversight) for transportation of dangerous cargoes.
Bowser (fuel servicing truck) ATZ-20
Bowser ATZ-20 is designed for:
transportation of oil products with a density of no more than 860 kg/m3:
by-gravity discharge of oil products from own tanker into a reservoir located lower than the the tanker level;
discharge of oil products by means of a pump installed on the bowser through a liquid flow meter and passing the liquid flow meter and the filter;
distribution of fuel to consumers through the liquid flow meter;
The bowser is manufactured on the basis of chassis of MZKT-692371.
Tanker’s shell capacity, m3 |
20 |
Full loaded mass, kg |
34,000 |
Laden mass of tanker, kg |
11,000 |
Distribution of fully loaded mass, kg, at most: |
2 x 7,000 |
Overalll dimensions of tankers, mm, at most: |
9,100 |
Diameters of rundown pipes (internal), mm |
50.65 |
Capacity of pump SVN-80A, m3/s (m3/h): |
8.9 x 10-3 (35) |
Total service life, years |
10 |
Tanker-Semitrailer PPTs-20
It is designed for transportation of crude oil and other oil products by operation in hard road conditions in combination with an all will drive prime mover.
The tanker-semitrailer PPTs-20 is an isothermal vehicle with V=20m3.
The tanker is mounted on the special chassis MTM-9330A4(711) with ABS.
TECHNICAL CHARACTERISTICS:
The tanker is mounted on the chassis of MTM-9330A4(711).
Rated capacity, l: 20,000
Thermal insulation – 50 mm frothed polyurethane foam composition.
The section is equipped with: a filler, a filling hatch, vapour balancers, internal breakwaters.
In the lower part there is a hatch for clean-up and washover jobs and a bottom valve.
Peripheral self-priming pump: SVN-80A
Tanker‘s material/thickness, mm: 09G2S/4
- length: 11,200
- width: 2,500
- height: 3,300
Pipeline diameter (internal), mm: 100
Discharge time of tanker contents, min: 20
In the course of many years in manufacture is used an isothermal heat-insulating material which worked out by our enterprise jointly with research institute and having no analogues by its characteristics.
This heat-insulation enables preservation within 12 hours the temperature of the filled liquid by difference in temperature of 30°C between that of the filled liquid and theenvironment which is certified by Report No. 3-2000 of 19 April 2000.
Possible is installation of a tubular register inside the tanker for the purpose of emergency heating of oil.
Tanker-Semitrailer for Transportation of Oil Products PPTs-22
on the Basis of the Chassis of MAZ 9919-012 (ABS)
The four-section tanker-semitrailer PPTs-22 (V=22m3) is designed for transportation of light oil products with a density of at most 0.86g/cm3, discharge by gravity (possible is installation of pumping equipment).
Additional components: 2 sticks, 2 hoses, a set of rapid-action couplings, felted cloth, a sandpit, a fire extinguisher tec. In conformity with requirements of the Gospromnadsor (state industrial oversight) for transportation of dangerous cargoes across the territory of the Republic of Belarus.
TECHNICAL CHARACTERISTICS |
|
The tanker is mounted on the chassis of |
MAZ-9919-012(ABS) |
Recommended prime mover MAZ-MAN 543268 |
|
Rated capacity, l |
22,000±2% |
Number of cisterns (sections) |
1 (4) |
Each section is equipped with imported components (ALFONS HAAR, EQUIPTANK): a recuperation system, a filler, a filling hatch, vapour balancers, internal breakwaters. In the lower part there is a bottom valve, a gravity-discharge system, a block of pneumatic valve control etc. |
|
Tanker material/thickness, mm |
09G2S / 4 |
Pipeline diameter (internal), mm |
65 |
Tanker-Semitrailer PPTs-26
The PPTs-26 is mounted on the chassis of the semitrailer-container carrier MAZ-9919-012(010) with ABS.
Options: It may be completed with fuelling, pumping equipment and other additional components.
TECHNICAL CHARACTERISTICS:
The tanker is mounted on the chassis for MAZ-9919-012(010) with ABS.
Rated capacity, l: 26,000±2%
Number of cisterns (sections): 2
Rated capacity of each cistern (section), l: 13,000
Each section is equipped with: a filler, a filling hatch, vapour balancers, internal breakwaters.
In the lower part there is a separate discharge system, a bottom valve.
Tanker‘s material/thickness, mm: 09G2S/4
Fully loaded mass, kg, at most: 36,000
Laden mass of tanker, kg,: 13,600
- length: 12,320
- width: 2,500
- height: 3,160
Pipeline diameter (internal), mm: 80
The tanker-semitrailer may be equipped with a vapour extraction system, a system of upper and lower filling, a gravity discharge system or pumping equipment, a block bottoms valves control unit, bottom valves with a pneumatic drive and manual backup, stickers, discharge hoses, a set of rapid-action couplings, a ladder and an operating platform.
The chassis has been re-equipped according to the rules of the Promatomnadsor of the Republic of Belarus for transportation of dangerous cargoes.
Additional components: 2 sticks, 2 hoses, a set of rapid-action couplings, felted cloth, a sandpit, a fire extinguisher tec. In conformity with requirements of the Gospromnadsor (state industrial oversight) for transportation of dangerous cargoes across the territory of the Republic of Belarus.
Tanker-Semitrailer for Transportation of Oil Products PPTs-30
The four-section tanker-semitrailer PPTs-30 (V=30m3) is designed for transportation of light oil products with a density of at most 0.86g/cm3 and discharge by gravity.
The tanker is equipped with an ecological duct for collection of spillages, a ladder. An operating platform, a technological control unit.
TECHNICAL CHARACTERISTICS |
|
The tanker is mounted on SAF axles |
Braking system EBS, pneumatic suspension, front lifting axle, lean-to jumper (?), lifting device Joist |
Rated capacity, l |
30,000±2% |
Each section is equipped with imported components (Germany): a vapour extraction system, an aluminium filling hatch, a vapour balancer, internal breakwaters. In the lower part there is a bottom valve, a gravity-discharge system, ball cocks, a pneumatic valve control and air treatment unit etc. |
|
Tanker material/thickness, mm |
09G2S / 5 |
Discharge device Du |
80 |
Laden mass, kg |
9,000 |
Tanker-Semitrailer PPTsB-20 for Transportation of Bitumen
The tanker-semitrailer PPTsB-20 is designed for transportation of petroleum bitumen brand BND 90/130 at the temperature of 220°C. it consists of one-section isothermal system with a volum of 20m3 which is fastened onto a container carrier MAZ 9919 by means of fitting locks.
The tanker-semitrailer conforms in full measure with the Rules of transportation of of dangerous goods by motor vehicles in the territoty of the Republic of Belarus.
Service life – 10 years.
It has been certified as a transport vehicle – it possesses approval fot the type of a transport vehicle and a permission for manufacture issued by the Gospromnadsor (state industrial oversight).
To download production catalogue
